60 ordinary frame curtain wall

 60 Ordinary Frame Curtain Wall: Excellence in Raw Material, Aluminum Profile, and Surface Treatment  

 ——Redefining Building Facades Through Ordinary Frame Innovation  

 1. Introduction to Aluminum Profile Curtain Wall Systems  

The Aluminum Profile Curtain Wall represents the pinnacle of modern architectural engineering, combining lightweight Raw Material excellence with precision Surface Treatment technologies. The 60 Ordinary Frame Curtain Wall, featuring a 60mm exposed frame design, exemplifies how Aluminum Profile systems balance structural integrity, aesthetic versatility, and cost efficiency. By leveraging high-quality Raw Materials like 6063-T5 aluminum alloy and advanced Surface Treatment methods, this Curtain Wall solution meets the demands of commercial, industrial, and public buildings worldwide.  

The Ordinary Frame design, a hallmark of this system, enhances installation efficiency while maintaining visual clarity. With Aluminum Profiles constituting over 80% of the structural components, the Curtain Wall achieves unparalleled durability and adaptability. Below, we explore how Raw Material selection, Aluminum Profile engineering, Surface Treatment innovations, and Ordinary Frame design converge to create a benchmark in facade technology.  

 2. Raw Material Selection: The Foundation of Performance  

The superiority of the 60 Ordinary Frame Curtain Wall begins with its Raw Materials. The 6063-T5 aluminum alloy, a premium Raw Material, offers a unique combination of lightweight properties (density: 2.7g/cm³) and mechanical strength (tensile strength: ≥160MPa). This Raw Material undergoes rigorous metallurgical testing to ensure consistency in grain structure, minimizing defects during Aluminum Profile extrusion.  

 Key Raw Material Criteria:  

- Purity Standards: Primary aluminum ingots with ≥99.7% purity, reducing impurities that compromise Surface Treatment adhesion.  

- Alloy Ratios: Magnesium (0.5–1.0%) and silicon (0.2–0.6%) optimize strength and extrusion feasibility for Aluminum Profiles.  

- Recyclability: Post-consumer Raw Materials account for 70% of inputs, aligning with circular economy principles.  

By prioritizing Raw Material quality, the 60 Ordinary Frame Curtain Wall achieves a 35-year service life, even in coastal or industrial environments where Surface Treatment durability is critical.  

 3. Aluminum Profile Engineering: Precision and Adaptability  

The Aluminum Profile is the backbone of the 60 Ordinary Frame Curtain Wall. Each profile is extruded using 5,500-ton hydraulic presses, ensuring dimensional accuracy within ±0.1mm. The Ordinary Frame structure integrates multi-cavity designs to enhance thermal and acoustic performance.  

 Aluminum Profile Structural Features:  

- Multi-Cavity Design: Three isolated chambers within the 60mm Aluminum Profile reduce heat transfer (U-value: 2.8W/m²·K) and dampen noise by 25dB.  

- Reinforced Corners: Localized thickening (up to 3.5mm) at stress points improves wind resistance (Grade 8, 1.2kPa).  

- Modular Compatibility: Standardized Aluminum Profile lengths (6m) simplify logistics and reduce on-site waste.  

The Ordinary Frame’s open design allows rapid installation of glass or composite panels, with Aluminum Profile connectors enabling ±2mm tolerance adjustments. This adaptability makes the Curtain Wall ideal for retrofit projects and seismic zones.  

 4. Surface Treatment: Durability Meets Aesthetics  

Surface Treatment is pivotal to the 60 Ordinary Frame Curtain Wall’s longevity and visual appeal. Post-extrusion Aluminum Profiles undergo multi-stage Surface Treatment processes to resist corrosion, UV degradation, and mechanical wear.  

 Surface Treatment Options:  

1. Anodizing:  

   - Forms a 20–25μm oxide layer (hardness: HV250), ideal for arid climates.  

   - Available in champagne, silver, and bronze finishes.  

2. Powder Coating:  

   - Electrostatic application of polyester-epoxy hybrid coatings (thickness: 60–80μm).  

   - 200+ RAL colors, including matte and metallic effects.  

3. PVDF Fluorocarbon Coating:  

   - Three-coat system (primer + color + clear) for coastal/industrial zones.  

   - Withstands 6,000 hours of salt spray (ASTM B117) and 20-year color retention (ΔE ≤2.0).  

Surface Treatment quality is validated through cross-cut adhesion tests (ISO 2409 Grade 0) and QUV accelerated weathering (4,000 hours). By harmonizing Surface Treatment performance with Aluminum Profile geometry, the Curtain Wall achieves both durability and design flexibility.  

 5. Ordinary Frame Design: Simplifying Complexity  

The Ordinary Frame system distinguishes the 60 Aluminum Profile Curtain Wall through its balance of simplicity and functionality. The exposed 60mm frame, constructed from thermally broken Aluminum Profiles, eliminates hidden seals and reduces reliance on structural silicones.  

 Ordinary Frame Advantages:  

- Rapid Installation: Pre-assembled Aluminum Profile units reduce on-site labor by 40%.  

- Ease of Maintenance: Individual panel replacement without disassembling the Curtain Wall structure.  

- Aesthetic Customization: Surface Treatment options allow the Ordinary Frame to contrast or complement facade elements.  

Case in point: The Dubai Metro Station project utilized a silver-anodized Ordinary Frame with blue-tinted glass, achieving a 30% faster installation timeline compared to unitized Curtain Wall systems.  

 6. Technical Advantages of the 60 Ordinary Frame Curtain Wall  

 6.1 Structural Performance  

- Wind Resistance: Aluminum Profile reinforcements withstand 1.5kPa wind loads (AS/NZS 1170.2).  

- Seismic Compliance: Flexible Ordinary Frame joints tolerate ±4mm displacements (EN 1998-1).  

- Fire Rating: A2-s1, d0 classification (EN 13501-1) due to non-combustible Raw Materials.  

 6.2 Energy Efficiency  

- Thermal Break: PA66 GF25 insulation strips (24mm width) reduce thermal bridging by 70%.  

- Solar Control: Low-E glass paired with reflective Surface Treatment coatings cut cooling loads by 25%.  

 6.3 Sustainability  

- Recycled Content: 75% of Aluminum Profiles use post-industrial Raw Materials.  

- Low VOC: Water-based Surface Treatment coatings emit <50g/L VOC (EU Directive 2004/42/CE).  

 7. Global Case Studies  

 7.1 Shanghai Financial Tower (China)  

- Aluminum Profile: 60 series Ordinary Frame with 12mm tempered glass.  

- Surface Treatment: PVDF fluorocarbon coating (RAL 9006).  

- Result: 40% faster installation; 22% energy savings via thermal breaks.  

 7.2 Berlin Tech Park (Germany)  

- Aluminum Profile: Recycled-content Raw Materials for LEED Platinum certification.  

- Surface Treatment: Self-cleaning TiO₂ nanocoating.  

- Result: 60% lower maintenance costs; 15-year warranty on Surface Treatment.  

 7.3 Mumbai Coastal Plaza (India)  

- Aluminum Profile: Marine-grade 6063-T6 Raw Materials.  

- Surface Treatment: Dual-layer anodizing (30μm).  

- Result: Zero corrosion after 5 years in 90% RH, 5mg/m³ salt environments.  

 8. Future Innovations  

 8.1 Smart Aluminum Profiles  

- Integrated Sensors: Real-time monitoring of Aluminum Profile stress and Surface Treatment integrity.  

- Phase-Change Materials: Microencapsulated PCMs within Aluminum Profiles for dynamic thermal regulation.  

 8.2 Advanced Surface Treatments  

- Graphene Coatings: 50% higher scratch resistance than PVDF.  

- Electrochromic Finishes: Surface Treatment layers that tint on demand, reducing glare and HVAC loads.  

 8.3 Circular Economy Models  

- Closed-Loop Recycling: 95% recovery rate for end-of-life Aluminum Profiles.  

- Bio-Based Coatings: Surface Treatment derived from plant resins, achieving carbon neutrality.  

 9. Conclusion  

The 60 Ordinary Frame Curtain Wall redefines architectural excellence through its symbiotic use of high-grade Raw Materials, precision-engineered Aluminum Profiles, and cutting-edge Surface Treatment technologies. By prioritizing the Ordinary Frame design, this system delivers unmatched installatïon speed, maintenance efficiency, and aesthetic versatility.  

As the construction industry shifts toward sustainability and smart technologies, the Aluminum Profile Curtain Wall will continue to evolve—driven by innovations in Raw Material science, Surface Treatment chemistry, and Ordinary Frame functionality. Choosing the 60 series isn’t just selecting a Curtain Wall; it’s investing in a legacy of durability, efficiency, and design freedom.  

Based on raw materials and using curtain walls as a medium, we create the eternal beauty of architecture

As a benchmark solution for modern building facades, the 60 ordinary frame curtain wall interprets the deep integration of engineering and aesthetics through rigorous selection of raw materials and innovative breakthroughs in curtain wall technology. From refined 6063-T5 high-grade aluminum alloy raw materials in mines, to precision extruded multi cavity curtain wall profiles, and to the support of nanoscale surface treatment processes - this industry chain that runs through raw material science, structural mechanics, and surface protection always takes quality as the anchor, endowing buildings with vitality beyond time.

The excellent performance of curtain wall systems begins with the essence of raw materials. Each ton of 6063-T5 aluminum alloy raw material undergoes spectral detection and homogeneous melting casting to ensure that the magnesium and silicon content errors are ≤ 0.05%, eliminating stress defects from the source. The multi cavity design and wall thickness reinforcement of the curtain wall (with the main load-bearing area ≥ 2.5mm) allow the building to remain firm even under strong winds of 12 on the Beaufort scale and earthquakes of 8 on the Beaufort scale. This curtain wall technology based on the stability of raw materials not only achieves a 35 year long service life, but also innovatively reduces building energy consumption by 30% with bridge insulation, self-cleaning coatings, and other features, making it the preferred choice for green certification projects.